Welcome to our community

Read-Only Read-Only Topic
Go
New
Find
Notify
Tools
-star Rating Rate It!  Login/Join 
Paul Entwistle
Member
Posted
Does anyone have a parts breakdown or service manual for this plotter?

I have a cog with two broken teeth. the cog is located on the right hand side near the control panel. if you drop down the right hand cover and look at the plotter from the right hand side the cog is located to the right of the large black cog with a belt running down from it.
 
Posts: 20 | Location: North WestReport This Post
Paul Entwistle
Member
Posted Hide Post
the broken cog is about 1 1/2cm in diameter
 
Posts: 20 | Location: North WestReport This Post
Paul Entwistle
Member
Posted Hide Post
Never mind everybody, we're getting Oce in to fix it, plus my last day is Friday, im on to pastures new... So i really dont care. Yipee!
 
Posts: 20 | Location: North WestReport This Post
AdamB
Member
Posted Hide Post
About time - Nice one Paul!


Regards,

Adam
 
Posts: 17 | Location: LancashireReport This Post
  Powered by Eve Community  

Read-Only Read-Only Topic